Solahart

Q: PHYSICAL PROPERTIES

Appearance: clear, dark yellow liquid Density: 1.14 – 1.17 g/cm3 pH value: 4.8 – 5.3 Boiling point / boiling range: 100°C – 105°C Freezing Point: -10°C Solubility in water: unlimited

Solahart is the leading manufacturer of solar hot water systems in Australia and around the world, providing solar hot water to over a million Australian households and businesses. Solahart’s beginnings date back to 1901 in Perth when two entrepreneurs formed SW Hart and Co Plumbers and Ironworks to manufacture tanks, troughs, and sinks for the pioneering community. In 1953 the company developed a method to harness the sun’s natural energy as a way to heat water, long before human-induced global warming was even heard of.

Thus Solahart was born and the company began manufacturing solar hot water heaters to suit the West Australian climate. By the mid-’60s Solahart started developing models to suit all Australian climates and was providing solar hot water to households and businesses all around the country.

Early Solahart installed on the Cocos Islands. In 1978 the Solahart 300L/80GE was introduced, receiving wide international recognition leading to the development of an international dealer network to provide Solahart hot water heaters to the world.

Today Solahart has manufactured over a million solar water heaters to be installed in over 80 countries on every continent around the world. Since 2001, Solahart has been part of Paloma Co. Ltd., an international leader in water heating and space heating.

Paloma has fostered the pioneering spirit that built Solahart in the 20th century and has added the corporate strength of a leading global company to enable Solahart to grow even further in the 21st century.

2009- Dealer of the Year South Asia, Solahart

2007- Best Performance in South Asia, Solahart

Solahart 302J
Solahart 181J

300 LT ROOF TOP SOLAR SYSTEM

Solahart 302J consists of roof mounted tank system, that saves considerable amount of space at ground level and their graceful quality make them efficient and reliable.

The Solahart 302J solar water heater is precisely designed to fulfil low-cost service in medium to high solar heat gain areas.

Decrease water heater energy use up to 89% .

Key Features

The Solahart J Series is a closed circuit, roof mounted solar water heater precisely designed to furnish low-cost service in medium to high solar gain areas. The maximum amount of energy from the sun is take out by Solahart’s revolutionary multi-flow collector, important feature of J Series.

The collector contains the heated Hartgard fluid which transferred to heat exchanger where the heat is conveyed to the tank water.

Roof mount model to save space
Reduces household greenhouse emissions
Energy Saving-water heating energy use cut by up to 89%
Low cost, Low maintenance and definitive operation

180 LT ROOF TOP SOLAR SYSTEM

The 181J solar water heater is precisely designed to provide low-cost service in medium to high solar gain areas.It is perfect for harsh water quality or frost prone areas.

The 181J solar water heater is perfect for small units as it requires low volumes of solar hot water.

Decrease water heater energy use up to 84%

Key Features

The Solahart J Series is a closed circuit, roof mounted solar water heater precisely designed to low-cost service in medium to high solar gain areas.

The collector contains the heated Hartgard fluid which transferred to heat exchanger where the heat is conveyed to the tank water.

Roof mount model to save space
Reduces household greenhouse emissions
Energy Saving-water heating energy use cut by up to 84%
Low cost, Low maintenance and definitive operation

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

RPI-3000A – High Performance

The RPI-3000A is designed to inhibit the mineral scale formation inside Reverse Osmosis systems, particularly with difficult Brackish feed water. The RPI-3000A is highly effective against Calcium Sulphate, Calcium&Magnesium Carbonate and Calcium Fluoride scaling.

RPI-3000A has the Dual Strength to inhibit the crystal growth mechanism and to disperse the tiny oxide and micro-crystal particles

APPLICATION

RPI-3000A is approved for use with cellulose acetate and polyamide membranes. The required dosage level ranges from 1 – 10 ppm as delivered. The dosage is proportional to the feed water flow. RPI-3000A can be used in its commercial form or diluted with pure water in any ratio. A maximum dilution ration of 1 to 10 must be respected. Diluted preparations must be rapidly consumed, within 24 hours ideally. RPI-3000A is easy to use, safe to handle and safe to store for several months.

PHYSICAL PROPERTIES

Appearance: clear, dark yellow liquid
Density: 1.14 – 1.17 g/cm3
pH value: 4.8 – 5.3
Boiling point / boiling range: 100°C – 105°C
Freezing Point: -10°C
Solubility in water: unlimited

STORAGE & HANDLING

RPI-3000A is safe to use and thus is not classified as a hazardous chemical (GGVE/GGVS, ICOA/IATA). Standard regulations and precautions when dealing with chemical products have to be followed.

The storage temperature should be between +5°C and 30°C. The product is supplied in containers suitable for air, road or sea transportation. Additional information is available inside the safety data sheets.

PACKAGING

Polyethylene canister (PE) 23.5 kg net
Standard drum (PE) 240 kg net
IBC Container (PE) 1.100 kg net

Technical DATASHEET

SAFETY DATASHEET

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.